print
About usGlobalReferencesContactWarrantyCareerDownloads
Banss America|Meat Processing and Slaughtering Automation EquipmentMeat Processing and Slaughtering Equipment
WORKFLOW - PIG

STUNNING

 

SCALDING PROCESSES

 

DEHAIRING

 

FINAL TREATMENT

 

WORKPLACE EQUIPMENT AND ACCESSORIES

 

Dehairing
The BANSS dehairing machines have been developed to allow ease of maintenance and cleaning.
This is reflected in the smooth surface design, the large cleaning doors on both sides
of the dehairing machine and the use of high quality materials.

Non-synchronous dehairing machines for slaughtering capacities
of up to 240 animals per hour
With model series DDM 120-1-2 to 240-2-2 BANSS utilizes international experience and the latest scientific findings in the development of non-synchronous dehairing machines. After scalding has been completed using either a scalding tunnel or the scalding tank, pigs are brought through an introduction chute. Scalding with 60°C (140°F) hot scalding water is continued with the dehairing process. The BANSS dehairing machines have been developed to allow ease of maintenance and cleaning.
Pig
Pig

Highlights

  • Optimized introduction of pigs
    into the machine
  • Includes conveyor for bristles removal
  • Water tank with fresh water dosing used to achieve maximum savings
  • Minimal footprint
  • With an automatic cleaning cycle directed towards the exiting equipment door, this design reduces potential bristle contamination of the carcass.
  • Opportunity to increase throughput
    by combining multiple machines

Available Options
  • Machine frame hot-dip galvanized,
    with stainless steel doors
  • Machine post and doors stainless steel,
    dehairing cylinders and U-bars hot-dip galvanized

Dehairing Stage 2

Dehairing Stage 1

Pig

DDM 120-1-2 with 1 machine

DDM 240-2-2 with 2 machines

Technical data
Models Capacity/hr Connected load [kW] Length [mm] Width [mm] Height [mm] Filling capacity [ltr]
DDM 120-1-2 120 19,75 2570 3710 2541 1290
DDM 240-2-2 240 39,5 3433 4014 4737 2580

Continuous dehairing for harvesting capacities
of 200 - 1000 animals per hour
Pig
With model series CDM 200-1 to 840-3 BANSS utilizes international experience
and the latest scientific findings in the development of continuous dehairing machines. After pre-scalding has been completed using either a scalding tunnel
or the scalding tank, the pigs are brought through into the dehairing machine by means of introduction chute. Scalding
with 60°C (140°F) hot water is constantly occurring with the dehairing process. 		After the dehairing process has been finished the ejection slide opens automatically and the carcass reaches
the receiving plate conveyor or table.
The BANSS dehairing machines have
been developed to ensure the ease of maintenance and cleaning which is reflected in the smooth surfaces, the large area cleaning doors on both sides of the dehairing machine and the use of high quality materials.
Pig

Highlights

  • Gentle treatment of pigs by special
    arrangement of the dehairing beaters
  • Optimal removal of claws
    with second dehairing cylinder
  • Suited for large sized animals
  • Adjustable dehairing time
    and machine filling
  • Using a limited amount of fresh water and special spray nozzles;
    making the carcass virtually germ free.

Available Options
  • Machine frame hot-dip galvanized,
    with stainless steel doors
  • Machine post and doors stainless steel,
    dehairing cylinders and U-bars
    hot-dip galvanized
Pig
Pig

Technical Data - Continuous dehairing with 1 dehairing cylinder
Models 1 piece Capacity/hr Connected load [kW] Length [mm] Width [mm] Height [mm] Filling capacity [ltr]
CDM 120-1-1 120 21,25 2670 2100 3405 1550
CDM 160-1-1 160 21,25 3570 2100 3405 2060
CDM 200-1-1 200 21,25 5070 2100 3405 2950
Models 2 piece Capacity/hr Connected load [kW] Length [mm] Width [mm] Height [mm] Filling capacity [ltr]
CDM 240-2-1 240 41,75 5780 2100 3705/3405 3100
CDM 300-2-1 300 41,75 6380 2100 3705/3405 3440

Technical Data - Continuous dehairing with 2 dehairing cylinders
Models 1 piece Capacity/hr Connected load [kW] Length [mm] Width [mm] Height [mm] Filling capacity [ltr]
CDM 200-1-2 200 28,75 3150 2100 3975 1900
CDM 260-1-2 260 28,75 3950 2100 3975 2400
CDM 320-1-2 320 28,75 4750 2100 3975 2900
Models 2 piece Capacity/hr Connected load [kW] Length [mm] Width [mm] Height [mm] Filling capacity [ltr]
CDM 400-2-2 400 56,75 6740 2100 4275 3800
CDM 460-2-2 460 56,75 7540 2100 4275 4300
CDM 520-2-2 520 56,75 8340 2100 4275 4800
CDM 580-2-2 580 56,75 9140 2100 4275 5300
CDM 640-2-2 640 56,75 9940 2100 4275 5800
Models 3 piece Capacity/hr Connected load [kW] Length [mm] Width [mm] Height [mm] Filling capacity [ltr]
CDM 840-3-2 840 85,50 15759 2100 5125 7700

info
info

info